Off-Grid Solar Inverters
Explore off-grid inverter options designed for solar systems operating independently of the utility grid. Compare product information, review battery and solar-charging requirements, and discuss your site loads with Sakshine Solar.
Power designed around your site and load requirements.
Off-grid inverter systems are planned around the solar array, battery bank and connected loads. Solar charging hardware, generator or AC input, output waveform and load-starting capability vary by model, so every feature must be checked against the official datasheet.
Generate, store and use solar power independently.
A simplified system concept showing the main elements of an off-grid installation. Actual equipment arrangement depends on the selected inverter, battery and site design.
PV modules provide DC electricity within the inverter or charger input limits.
Converts and manages power for the supported AC output and charging functions.
Stores energy within the approved voltage, chemistry and charging limits.
Loads must remain within continuous, surge and battery-system capabilities.
Planning note: Conceptual flow only, not an electrical wiring diagram. Generator / AC input is available only on models that explicitly support it.
Detailed inverter listing
Off-grid inverter range · product entries awaiting confirmation
PENDING
Off-Grid Solar Inverter — Product Entry 01
Manufacturer / model: To be provided
Layout placeholder for a standalone inverter / charger model. Battery bank, pv charging and ac output limits must be confirmed from the selected manufacturer's official documentation.
FEATURES VERIFY BY MODEL
01 Integrated solar charger, if supported
02 Battery voltage and chemistry
03 Rated AC output and surge
04 Protection, operating conditions and warranty pending
KEY SPECIFICATIONS VALUES PENDING
Suitable project type will be identified only after checking the model's output, battery requirements, PV input and site load profile.
PENDING
Off-Grid Solar Inverter — Product Entry 02
Manufacturer / model: To be provided
Layout placeholder for a solar-priority off-grid inverter model. Pv input window and charging configuration must be confirmed from the selected manufacturer's official documentation.
FEATURES VERIFY BY MODEL
01 MPPT / PWM charger details
02 Maximum charging current
03 AC output waveform and phase
04 Protection, operating conditions and warranty pending
KEY SPECIFICATIONS VALUES PENDING
Suitable project type will be identified only after checking the model's output, battery requirements, PV input and site load profile.
PENDING
Off-Grid Solar Inverter — Product Entry 03
Manufacturer / model: To be provided
Layout placeholder for a battery-focused off-grid inverter model. Battery interface, charge profile and protection must be confirmed from the selected manufacturer's official documentation.
FEATURES VERIFY BY MODEL
01 Supported battery models
02 Continuous and surge output
03 Generator / AC input, if available
04 Protection, operating conditions and warranty pending
KEY SPECIFICATIONS VALUES PENDING
Suitable project type will be identified only after checking the model's output, battery requirements, PV input and site load profile.
PENDING
Off-Grid Solar Inverter — Product Entry 04
Manufacturer / model: To be provided
Layout placeholder for a higher-load off-grid inverter model. Starting current and simultaneous load planning must be confirmed from the selected manufacturer's official documentation.
FEATURES VERIFY BY MODEL
01 PV string and charger limits
02 Battery bank sizing requirements
03 Monitoring and communications
04 Protection, operating conditions and warranty pending
KEY SPECIFICATIONS VALUES PENDING
Suitable project type will be identified only after checking the model's output, battery requirements, PV input and site load profile.
Try another search term or clear the search.
Product information notice: The four cards above are layout placeholders, not confirmed Sakshine Solar stock or manufacturer models. No model number, rated capacity, efficiency, MPPT count, voltage, protection rating, certification or warranty is being claimed. Replace each card only with verified product data and the matching official product image.
Size the complete standalone system.
Do not select an off-grid inverter by wattage alone. Review the PV array, battery bank and connected loads together.
Confirm battery chemistry, nominal voltage, usable capacity, charge profile, current limits and approved battery guidance.
BATTERY CHECKVerify maximum PV power, voltage window, MPPT / PWM type, input current and whether the charger is integrated.
PV DESIGN CHECKReview continuous output, surge capacity, phase, waveform and starting demand from pumps, motors or compressors.
LOAD CHECKCheck whether generator / AC input exists, its limits, changeover behaviour, protection functions and enclosure rating.
SYSTEM CHECKOff-grid inverter specification checklist
Complete every value from the official inverter and compatible battery documentation.
| AC output | |
|---|---|
| Rated AC output power and phase | To be confirmed from inverter datasheet |
| Output voltage, frequency and waveform | To be confirmed from inverter datasheet |
| Peak / surge output and duration | To be confirmed from inverter datasheet |
| Continuous output and power factor | To be confirmed from inverter datasheet |
| PV input & solar charger | |
| Maximum PV array power | To be confirmed from inverter / charger datasheet |
| Maximum PV input voltage and operating range | To be confirmed from datasheet |
| Solar charge controller type (MPPT / PWM / external) | To be confirmed for exact model |
| Maximum solar charging current | To be confirmed from datasheet |
| Battery interface | |
| Nominal battery voltage and operating range | To be confirmed from datasheet |
| Supported battery chemistry / model guidance | To be confirmed from manufacturer documentation |
| Maximum charge and discharge current | To be confirmed from datasheet |
| Battery charge profile and protection | To be confirmed from documentation |
| Input sources, protection & general | |
| Generator / AC input support and limits | Only if supported by the model |
| Transfer / changeover behaviour, if applicable | To be confirmed from datasheet |
| Efficiency and idle consumption | To be confirmed from datasheet |
| Protection functions and enclosure rating | To be confirmed from datasheet |
| Monitoring, dimensions, weight and temperature range | To be confirmed from manufacturer documentation |
| Warranty and applicable certifications | To be confirmed from supporting documents |
Plan for sites beyond reliable grid supply.
Off-grid system suitability depends on available solar resource, load profile, battery autonomy, equipment ratings and local installation conditions.
Remote homes & properties
Assess daily energy demand, essential appliances, seasonal solar availability and the required battery autonomy.
Farms & rural sites
Check pump or motor starting loads, operating schedules, cable runs and the inverter's documented surge capacity.
Remote equipment & facilities
Plan for continuous or scheduled loads, service access, environmental conditions and backup charging sources where supported.
Frequently asked questions
Understand the main considerations before choosing an off-grid inverter.
What is an off-grid solar inverter?
An off-grid inverter is designed for a solar power system that operates independently of the utility grid. It works with a suitable energy source and, for many systems, a battery bank. Exact input and output functions vary by model.
Can an off-grid inverter work without a battery?
Do not assume it can. Battery requirements differ between models and system architectures. Some equipment may support limited PV-direct operation, while many systems require a battery. Follow the manufacturer's approved configuration.
Which battery is suitable for an off-grid inverter?
Check the inverter's supported battery chemistry, nominal voltage, charge profile and current limits. Use only battery types and models approved by the manufacturer or specified in its compatibility documentation.
Can an off-grid inverter run pumps, refrigerators or motors?
It depends on continuous output, surge rating and duration, battery discharge capability, wiring and the appliance's starting current. A load assessment is needed before selection.
Can I connect a generator to an off-grid inverter?
Only if the selected model has a documented generator or AC input and the source meets its voltage, frequency, power and connection requirements. This capability is not universal.
How do I calculate the required battery capacity?
Start with the energy use of the loads, the required backup duration, battery operating limits, system efficiency and expected solar availability. A qualified system design should verify the usable capacity and charging plan.
Discuss your off-grid solar inverter requirements.
Share your solar array, battery bank, connected loads and backup-duration requirements. Our team can help identify the product documentation and system checks needed for the next step.
Product information and specifications are subject to confirmation from the relevant manufacturer documentation.
← Back to inverter catalogue